Solar power has become part of everyday life in Nepal. AEPC figures presented by its executive director list close to one million solar home systems, thousands of institutional solar PV systems (ISPS) and several thousand solar pumps across the country. Nepal also has plenty of sunshine: average solar radiation is about 3.9 to 5.1 kilowatt-hours per square metre per day.
For a school, clinic, monastery, hotel or office, a good solar system starts long before panels reach the roof. Here is a practical checklist.
1. Start with the load, not the panels
List every appliance you want to run – lights, computers, fans, a fridge for vaccines or food, water pumps – with its power rating and the hours it is used each day. This tells your designer how much energy the system must produce and store. Sizing from a real load list avoids both undersized systems that fail by evening and oversized ones that waste money.
2. Decide how the system will be used
- Daytime only: loads that run while the sun shines need little or no battery storage.
- Day and night: lights, medical equipment and computers after dark need batteries, which add cost and maintenance.
- Backup for the grid: where grid power is available but unreliable, solar plus storage can bridge outages.
- Off-grid: where there is no grid, the system must supply everything, so careful sizing matters most.
3. Check the site
The array needs a clear, unshaded area facing the sun for most of the day – a strong roof or a ground-mounted structure. Look for shade from trees, nearby buildings and water tanks; check the roof's condition and strength; and keep the distance between panels, controller and batteries short to limit cable losses.
4. Understand the main components
- Solar panels – generate direct current electricity from sunlight.
- Charge controller or inverter – manages charging and converts power for ordinary appliances.
- Batteries – store energy for night and cloudy days (if the system uses them).
- Mounting, wiring and protection – earthing, fuses and surge protection keep people and equipment safe.
5. Plan for maintenance
Solar is low-maintenance, not no-maintenance. Panels should be kept clean and free of shade; batteries need regular checks and eventual replacement; and someone on site should know how to read the system's indicators and whom to call. A clear service arrangement with your supplier is as important as the equipment.
6. Questions to ask any supplier
- Can you show the load calculation and design behind the proposed size?
- What are the make, model and warranty of each major component?
- Who installs, who commissions, and who trains our staff?
- How and how quickly is after-sales service provided in our district?
How NEDCO can help
NEDCO designs, promotes and installs solar home systems (SHS), small solar home systems (SSHS), institutional solar PV and PV pumping systems, solar street lights and solar water heaters. It is also the country representative of Central Electronics Ltd. (CEL), India, for solar PV distribution and installation in Nepal. See our solar services or send us your requirement.
Sources
- AEPC – Nepal last-mile electrification (presentation by AEPC Executive Director: SHS, ISPS and solar pump counts)
- UKRI Energy Catalyst – Country guide: Nepal (solar radiation)
Figures are as reported by the sources above and may have changed since publication. This article is general information, not engineering advice for a specific site.
